A phone call books the load, but the rate confirmation is what the broker pays from. If the rate, the stops or the detention terms on that sheet are different from what you were told, the sheet usually wins. So read it before you sign it, not after you deliver.
Before you get into the details, check that the load pays at all. The guide to telling if a load pays and the free cost per mile calculator cover that part.
1. Check the broker
- •Legal name and MC or USDOT number. They should be printed on the rate con. If they're missing, ask why.
- •Their operating authority. Look the MC number up on FMCSA's SAFER or licensing site and make sure the authority is active and the name matches.
- •A real contact. The rep's name, direct phone and email, and an after-hours number for when something goes wrong at 2 a.m.
- •The load or reference number. It goes on your invoice. Without it, your bill can sit in a pile.
2. Check pickup and delivery
- •Full names and addresses. Shipper and receiver, spelled the way they are on the gate, not just a city.
- •Dates and appointment type. A set appointment and a first-come, first-served window are very different days. Know which one you have.
- •Numbers you'll need at the gate. Pickup numbers, PO numbers, delivery or confirmation numbers.
- •Every stop. Extra stops should be listed with stop-off pay. A stop that isn't on the sheet is hard to bill later.
3. Check the freight
- •Commodity, weight and count. Make sure the weight works for your truck and keeps you legal.
- •Equipment and settings. Trailer type, plus reefer temperature and continuous or cycle mode if it's a reefer load.
- •Special requirements. Hazmat, high value, tarps, straps, load locks, or team service. Know before you accept.
- •Who loads and who counts. Shipper load and count versus driver count changes what you're responsible for. Note seal requirements too.
4. Check the money
- •The line haul rate. It should match the number you agreed to on the phone. If it doesn't, stop and get a corrected rate con.
- •Fuel surcharge. Is it built into the rate, listed separately, or not there at all?
- •The all-in total. The total should be written on the sheet, not something you have to work out.
- •Rate per mile with deadhead. Divide the total by loaded miles plus the empty miles to get there. The <a href="/guides/deadhead-miles-owner-operator" className="text-primary underline-offset-2 hover:underline">deadhead miles guide</a> shows how.
5. Check the extras (accessorials)
This is where most money gets lost. If an extra isn't on the rate con, assume you'll have a hard time getting paid for it.
- •Detention. How many free hours, the hourly rate after that, any daily cap, and how and when you have to report it. See <a href="/guides/how-to-get-paid-for-detention-owner-operator" className="text-primary underline-offset-2 hover:underline">how to get paid for detention</a>.
- •Layover and TONU. What you get if the load sits overnight, or if it cancels after you've been dispatched (truck ordered, not used).
- •Lumper fees. Who pays the lumper, whether the broker sends a payment code, and what receipt you need to get reimbursed.
- •Other charges. Driver assist, extra stops, or anything else you expect to bill.
6. Check how you get paid
- •Payment terms. How many days until they pay, and the fee for quick pay if you want it sooner.
- •Required paperwork. Usually a signed BOL or POD, your invoice, and any lumper or scale receipts.
- •Where to send it. Email, a broker portal, or your factoring company. The wrong inbox can cost you a week.
- •Fines and deductions. Late fees, tracking-app requirements, and penalties for missed check calls. Read the fine print.
When the load delivers, the guide to invoicing a broker covers what to put on the bill so it matches this sheet.
Keep the signed rate con on your phone
Save the signed copy where you can pull it up at a shipper, a scale or a dock, not just buried in an email thread. When it's time to invoice, the numbers on the bill should match the rate con exactly.
TruxSheet lets you drop in a rate con or broker email from your phone and fills in the load for you to check before it saves, so the broker, stops, dates and rate are already there when you invoice. This guide is general information, not legal advice; every broker's terms are different, so read the whole agreement.
Frequently asked questions
What is a rate confirmation in trucking?
A rate confirmation (rate con) is the document a broker sends that confirms the load details and what they will pay: pickup and delivery, the freight, the rate, any extras like detention, and the payment terms. Once you sign it, it is the agreement you get paid on.
What should I check on a rate con before signing?
Check the broker's name and MC number, the pickup and delivery addresses and times, the commodity and weight, the equipment, the line haul rate and fuel surcharge, the all-in total, detention, layover, TONU and lumper terms, the payment terms, the paperwork they need, and any fines or tracking requirements.
What if the rate con doesn't match what the broker told me?
Don't sign it yet. Ask the broker to send a corrected rate confirmation with the agreed rate or terms. A phone promise that isn't on the sheet is hard to collect on later.
How do I check if a broker is legit?
Look up their MC or USDOT number on FMCSA's SAFER or licensing and insurance site and make sure the authority is active and the name matches the rate con. Many drivers also check the broker's credit and payment history through a load board or factoring company.
Do I need to keep rate confirmations?
Yes. Keep the signed rate con with the BOL and invoice for each load. It's your proof of the agreed rate if there's ever a short pay or a dispute, and it supports your income records at tax time.
